This is the latest recevied telemetry packets stored in our database for station/object DL8MWL-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Temp* | Humi* | Baro* | Value4* | Value5* |
---|---|---|---|---|---|
1719642422 | 20.2 deg C | 66.9 % | 1016.6 hPa | 0 | 0 |
1719641522 | 20.2 deg C | 66.3 % | 1016.6 hPa | 0 | 0 |
1719640622 | 19.9 deg C | 67.1 % | 1016.7 hPa | 0 | 0 |
1719639722 | 20.5 deg C | 65.4 % | 1016.7 hPa | 0 | 0 |
1719638821 | 20.2 deg C | 65.6 % | 1016.8 hPa | 0 | 0 |
1719638489 | 20.4 deg C | 64.9 % | 1016.7 hPa | 0 | 0 |
1719637589 | 20.1 deg C | 65.5 % | 1016.7 hPa | 0 | 0 |
1719636689 | 19.9 deg C | 66 % | 1016.7 hPa | 0 | 0 |
1719635789 | 19.6 deg C | 66.4 % | 1016.7 hPa | 0 | 0 |
1719634889 | 19.6 deg C | 66.3 % | 1016.7 hPa | 0 | 0 |
1719633989 | 19.5 deg C | 66.5 % | 1016.7 hPa | 0 | 0 |
1719633089 | 19.4 deg C | 66.3 % | 1016.8 hPa | 0 | 0 |
1719632188 | 19.4 deg C | 66.1 % | 1016.8 hPa | 0 | 0 |
1719631288 | 19.3 deg C | 66.4 % | 1016.7 hPa | 0 | 0 |
1719630388 | 19.6 deg C | 65.2 % | 1016.8 hPa | 0 | 0 |
1719629488 | 19.6 deg C | 65.3 % | 1016.7 hPa | 0 | 0 |
1719628588 | 19.7 deg C | 65.3 % | 1016.6 hPa | 0 | 0 |
1719627688 | 19.9 deg C | 64.8 % | 1016.4 hPa | 0 | 0 |
1719626788 | 20.2 deg C | 64.4 % | 1016.4 hPa | 0 | 0 |
1719626455 | 20.2 deg C | 64.2 % | 1016.6 hPa | 0 | 0 |
1719625555 | 20.3 deg C | 64.3 % | 1016.5 hPa | 0 | 0 |
1719624655 | 20.3 deg C | 64.3 % | 1016.4 hPa | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Baro: 0, 0.1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)