This is the latest recevied telemetry packets stored in our database for station/object N3IVK-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Vin* | Rx1h* | Dg1h* | Eff1h* | A5* |
---|---|---|---|---|---|
1719663761 | 13.73 Volt | 980 Pkt | 280 Pkt | 69 Pcnt | 0 None |
1719661962 | 13.73 Volt | 970 Pkt | 270 Pkt | 71 Pcnt | 0 None |
1719660162 | 13.73 Volt | 940 Pkt | 280 Pkt | 72 Pcnt | 0 None |
1719658362 | 13.73 Volt | 930 Pkt | 290 Pkt | 72 Pcnt | 0 None |
1719656562 | 13.05 Volt | 900 Pkt | 310 Pkt | 73 Pcnt | 0 None |
1719654762 | 12.9 Volt | 920 Pkt | 310 Pkt | 71 Pcnt | 0 None |
1719652962 | 13.73 Volt | 950 Pkt | 280 Pkt | 71 Pcnt | 0 None |
1719651162 | 13.73 Volt | 960 Pkt | 260 Pkt | 72 Pcnt | 0 None |
1719649362 | 13.73 Volt | 980 Pkt | 270 Pkt | 71 Pcnt | 0 None |
1719647562 | 13.73 Volt | 970 Pkt | 270 Pkt | 69 Pcnt | 0 None |
1719645762 | 13.73 Volt | 960 Pkt | 260 Pkt | 69 Pcnt | 0 None |
1719643962 | 13.73 Volt | 980 Pkt | 260 Pkt | 70 Pcnt | 0 None |
1719642162 | 13.73 Volt | 920 Pkt | 250 Pkt | 71 Pcnt | 0 None |
1719640362 | 13.73 Volt | 870 Pkt | 240 Pkt | 70 Pcnt | 0 None |
1719638562 | 13.73 Volt | 900 Pkt | 260 Pkt | 73 Pcnt | 0 None |
1719636762 | 13.73 Volt | 900 Pkt | 260 Pkt | 74 Pcnt | 0 None |
1719634963 | 13.73 Volt | 880 Pkt | 240 Pkt | 73 Pcnt | 0 None |
1719633163 | 13.73 Volt | 860 Pkt | 250 Pkt | 73 Pcnt | 0 None |
1719631363 | 13.73 Volt | 800 Pkt | 250 Pkt | 71 Pcnt | 0 None |
1719629563 | 13.73 Volt | 830 Pkt | 250 Pkt | 74 Pcnt | 0 None |
1719627763 | 12.9 Volt | 850 Pkt | 250 Pkt | 76 Pcnt | 0 None |
1719625963 | 13.73 Volt | 790 Pkt | 230 Pkt | 75 Pcnt | 0 None |
*Used Equation Coefficients:
Vin: 0, 0.075, 0
Rx1h: 0, 10, 0
Dg1h: 0, 10, 0
Eff1h: 0, 1, 0
A5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)