This is the latest recevied telemetry packets stored in our database for station/object ZL4AA-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Batt Volts* | Batt Amps* | PV Volts* | PV Watts* | Value5* |
---|---|---|---|---|---|
1719413402 | 12.2 V | 0 A | 0 V | 0 W | 0 |
1719412802 | 12.2 V | 0 A | 0 V | 0 W | 0 |
1719412202 | 12.2 V | 0 A | 0 V | 0 W | 0 |
1719411602 | 12.2 V | 0 A | 0 V | 0 W | 0 |
1719411002 | 12.2 V | 0 A | 0 V | 0 W | 0 |
1719410402 | 12.2 V | 0 A | 0 V | 0 W | 0 |
1719409802 | 12.2 V | 0 A | 0 V | 0 W | 0 |
1719409202 | 12.2 V | 0 A | 0 V | 0 W | 0 |
1719408602 | 12.2 V | 0 A | 0 V | 0 W | 0 |
1719408002 | 12.2 V | 0 A | 0 V | 0 W | 0 |
1719407402 | 12.2 V | 0 A | 0 V | 0 W | 0 |
1719406802 | 12.2 V | 0 A | 0 V | 0 W | 0 |
1719406202 | 12.2 V | 0 A | 0 V | 0 W | 0 |
1719405601 | 12.2 V | 0 A | 0 V | 0 W | 0 |
1719405002 | 12.2 V | 0 A | 0 V | 0 W | 0 |
1719404402 | 12.2 V | 0 A | 0 V | 0 W | 0 |
1719403801 | 12.2 V | 0 A | 0 V | 0 W | 0 |
1719403202 | 12.2 V | 0 A | 0 V | 0 W | 0 |
1719402602 | 12.2 V | 0 A | 0 V | 0 W | 0 |
1719402001 | 12.2 V | 0 A | 0 V | 0 W | 0 |
1719401402 | 12.2 V | 0 A | 0 V | 0 W | 0 |
1719400802 | 12.2 V | 0 A | 0 V | 0 W | 0 |
1719400201 | 12.2 V | 0 A | 0 V | 0 W | 0 |
1719399602 | 12.2 V | 0 A | 0 V | 0 W | 0 |
1719399002 | 12.2 V | 0 A | 0 V | 0 W | 0 |
*Used Equation Coefficients:
Batt Volts: 0, 0.1, 0
Batt Amps: 0, 0.1, 0
PV Volts: 0, 0.1, 0
PV Watts: 0, 1, 0
Value5: 0, 0.1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)