This is the latest recevied telemetry packets stored in our database for station/object ZL4AA-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Batt Volts* | Batt Amps* | PV Volts* | PV Watts* | Value5* |
---|---|---|---|---|---|
1719428402 | 12.2 V | 0 A | 0 V | 0 W | 0 |
1719427802 | 12.2 V | 0 A | 0 V | 0 W | 0 |
1719427202 | 12.2 V | 0 A | 0 V | 0 W | 0 |
1719426603 | 12.2 V | 0 A | 0.1 V | 0 W | 0 |
1719426002 | 12.2 V | 0 A | 0 V | 0 W | 0 |
1719425402 | 12.2 V | 0 A | 0.1 V | 0 W | 0 |
1719424802 | 12.2 V | 0 A | 0 V | 0 W | 0 |
1719424202 | 12.2 V | 0 A | 0 V | 0 W | 0 |
1719423602 | 12.2 V | 0 A | 0 V | 0 W | 0 |
1719423002 | 12.2 V | 0 A | 0 V | 0 W | 0 |
1719422402 | 12.2 V | 0 A | 0 V | 0 W | 0 |
1719421802 | 12.2 V | 0 A | 0.1 V | 0 W | 0 |
1719421201 | 12.2 V | 0 A | 0.1 V | 0 W | 0 |
1719420602 | 12.2 V | 0 A | 0 V | 0 W | 0 |
1719420002 | 12.2 V | 0 A | 0.1 V | 0 W | 0 |
1719419401 | 12.2 V | 0 A | 0.1 V | 0 W | 0 |
1719418803 | 12.2 V | 0 A | 0 V | 0 W | 0 |
1719418202 | 12.2 V | 0 A | 0 V | 0 W | 0 |
1719417602 | 12.2 V | 0 A | 0 V | 0 W | 0 |
1719417002 | 12.2 V | 0 A | 0 V | 0 W | 0 |
1719416402 | 12.2 V | 0 A | 0 V | 0 W | 0 |
1719415802 | 12.2 V | 0 A | 0 V | 0 W | 0 |
1719415202 | 12.2 V | 0 A | 0 V | 0 W | 0 |
1719414602 | 12.2 V | 0 A | 0 V | 0 W | 0 |
1719414002 | 12.2 V | 0 A | 0 V | 0 W | 0 |
*Used Equation Coefficients:
Batt Volts: 0, 0.1, 0
Batt Amps: 0, 0.1, 0
PV Volts: 0, 0.1, 0
PV Watts: 0, 1, 0
Value5: 0, 0.1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)