This is the latest recevied telemetry packets stored in our database for station/object HS6NYW-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | RxTraffic* | TxTraffic* | RxDrop* | RSSI* | SUN* |
---|---|---|---|---|---|
1719661469 | 6 Pkt | 0 Pkt | 0 Pkt | -59 dBm | 2 % |
1719660846 | 7 Pkt | 0 Pkt | 0 Pkt | -59 dBm | 4 % |
1719660224 | 1 Pkt | 0 Pkt | 0 Pkt | -58 dBm | 7 % |
1719659602 | 0 Pkt | 0 Pkt | 0 Pkt | -60 dBm | 9 % |
1719658355 | 3 Pkt | 0 Pkt | 0 Pkt | -58 dBm | 7 % |
1719657733 | 0 Pkt | 0 Pkt | 0 Pkt | -58 dBm | 20 % |
1719657111 | 0 Pkt | 0 Pkt | 0 Pkt | -59 dBm | 21 % |
1719656489 | 0 Pkt | 0 Pkt | 0 Pkt | -59 dBm | 21 % |
1719655867 | 0 Pkt | 0 Pkt | 0 Pkt | -58 dBm | 18 % |
1719655245 | 0 Pkt | 0 Pkt | 0 Pkt | -59 dBm | 16 % |
1719654623 | 0 Pkt | 0 Pkt | 0 Pkt | -59 dBm | 17 % |
1719654001 | 0 Pkt | 0 Pkt | 0 Pkt | -59 dBm | 17 % |
1719653379 | 0 Pkt | 0 Pkt | 0 Pkt | -57 dBm | 15 % |
1719652757 | 0 Pkt | 0 Pkt | 0 Pkt | -58 dBm | 14 % |
1719652135 | 0 Pkt | 0 Pkt | 0 Pkt | -58 dBm | 15 % |
1719651513 | 0 Pkt | 0 Pkt | 0 Pkt | -59 dBm | 18 % |
1719650891 | 0 Pkt | 0 Pkt | 0 Pkt | -59 dBm | 21 % |
1719650269 | 0 Pkt | 0 Pkt | 0 Pkt | -58 dBm | 25 % |
1719649647 | 0 Pkt | 0 Pkt | 0 Pkt | -59 dBm | 30 % |
1719649025 | 0 Pkt | 0 Pkt | 0 Pkt | -58 dBm | 35 % |
1719648403 | 0 Pkt | 0 Pkt | 0 Pkt | -60 dBm | 31 % |
1719647781 | 0 Pkt | 0 Pkt | 0 Pkt | -59 dBm | 32 % |
1719647159 | 0 Pkt | 0 Pkt | 0 Pkt | -58 dBm | 46 % |
1719646537 | 0 Pkt | 0 Pkt | 0 Pkt | -59 dBm | 26 % |
1719645915 | 0 Pkt | 0 Pkt | 0 Pkt | -59 dBm | 33 % |
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
RSSI: 0, -1, 0
SUN: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)