This is the latest recevied telemetry packets stored in our database for station/object SR9WXY. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Rx10min* | Tx10min* | Digi10min* | HostTx10m* | Tempre* |
---|---|---|---|---|---|
1719994531 | 35 Pkt | 10 Pkt | 3 Pkt | 0 Pkt | 26.5 DegC |
1719993922 | 45 Pkt | 3 Pkt | 1 Pkt | 0 Pkt | 26.5 DegC |
1719993322 | 37 Pkt | 4 Pkt | 2 Pkt | 0 Pkt | 26.5 DegC |
1719992722 | 40 Pkt | 5 Pkt | 2 Pkt | 0 Pkt | 26.5 DegC |
1719992120 | 33 Pkt | 3 Pkt | 1 Pkt | 0 Pkt | 26 DegC |
1719991520 | 50 Pkt | 5 Pkt | 2 Pkt | 0 Pkt | 26 DegC |
1719990917 | 32 Pkt | 6 Pkt | 4 Pkt | 0 Pkt | 26 DegC |
1719990317 | 37 Pkt | 4 Pkt | 1 Pkt | 0 Pkt | 26 DegC |
1719989116 | 41 Pkt | 8 Pkt | 5 Pkt | 0 Pkt | 26 DegC |
1719988516 | 50 Pkt | 5 Pkt | 3 Pkt | 0 Pkt | 26 DegC |
1719987917 | 61 Pkt | 8 Pkt | 5 Pkt | 0 Pkt | 26 DegC |
1719987316 | 52 Pkt | 5 Pkt | 3 Pkt | 0 Pkt | 26 DegC |
1719986716 | 47 Pkt | 3 Pkt | 1 Pkt | 0 Pkt | 26 DegC |
1719986116 | 45 Pkt | 5 Pkt | 2 Pkt | 0 Pkt | 26 DegC |
1719985514 | 48 Pkt | 9 Pkt | 3 Pkt | 0 Pkt | 26 DegC |
1719984905 | 43 Pkt | 5 Pkt | 2 Pkt | 0 Pkt | 26 DegC |
1719984303 | 43 Pkt | 4 Pkt | 2 Pkt | 0 Pkt | 25.5 DegC |
1719983702 | 21 Pkt | 7 Pkt | 4 Pkt | 0 Pkt | 25.5 DegC |
1719983103 | 25 Pkt | 3 Pkt | 1 Pkt | 0 Pkt | 25.5 DegC |
1719982503 | 48 Pkt | 7 Pkt | 4 Pkt | 0 Pkt | 25.5 DegC |
1719981903 | 49 Pkt | 4 Pkt | 2 Pkt | 0 Pkt | 25.5 DegC |
1719981303 | 61 Pkt | 5 Pkt | 2 Pkt | 0 Pkt | 25.5 DegC |
1719980703 | 73 Pkt | 6 Pkt | 4 Pkt | 0 Pkt | 25.5 DegC |
1719980103 | 58 Pkt | 5 Pkt | 3 Pkt | 0 Pkt | 25.5 DegC |
1719979503 | 57 Pkt | 5 Pkt | 2 Pkt | 0 Pkt | 25.5 DegC |
*Used Equation Coefficients:
Rx10min: 0, 1, 0
Tx10min: 0, 1, 0
Digi10min: 0, 1, 0
HostTx10m: 0, 1, 0
Tempre: 0, 0.5, -50
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)