This is the latest recevied telemetry packets stored in our database for station/object S55YLI-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Vin* | Rx1h* | Dg1h* | Eff1h* | Temp* |
---|---|---|---|---|---|
1719654142 | 12.3 Volt | 1190 Pkt | 270 Pkt | 76 Pcnt | 0 C |
1719653846 | 12.3 Volt | 1180 Pkt | 270 Pkt | 76 Pcnt | 0 C |
1719653842 | 12.3 Volt | 1180 Pkt | 270 Pkt | 76 Pcnt | 0 C |
1719653542 | 12.3 Volt | 1210 Pkt | 270 Pkt | 75 Pcnt | 0 C |
1719653243 | 12.3 Volt | 1230 Pkt | 280 Pkt | 74 Pcnt | 0 C |
1719653242 | 12.3 Volt | 1230 Pkt | 280 Pkt | 74 Pcnt | 0 C |
1719652942 | 12.3 Volt | 1230 Pkt | 270 Pkt | 74 Pcnt | 0 C |
1719652644 | 12.23 Volt | 1210 Pkt | 260 Pkt | 73 Pcnt | 0 C |
1719652642 | 12.23 Volt | 1210 Pkt | 260 Pkt | 73 Pcnt | 0 C |
1719652342 | 12.3 Volt | 1200 Pkt | 250 Pkt | 73 Pcnt | 0 C |
1719652052 | 12.3 Volt | 1180 Pkt | 250 Pkt | 73 Pcnt | 0 C |
1719652042 | 12.3 Volt | 1180 Pkt | 250 Pkt | 73 Pcnt | 0 C |
1719651742 | 12.3 Volt | 1190 Pkt | 250 Pkt | 72 Pcnt | 0 C |
1719651444 | 12.3 Volt | 1140 Pkt | 240 Pkt | 72 Pcnt | 0 C |
1719651442 | 12.3 Volt | 1140 Pkt | 240 Pkt | 72 Pcnt | 0 C |
1719651142 | 12.3 Volt | 1130 Pkt | 240 Pkt | 73 Pcnt | 0 C |
1719650843 | 12.3 Volt | 1120 Pkt | 230 Pkt | 73 Pcnt | 0 C |
1719650842 | 12.3 Volt | 1120 Pkt | 230 Pkt | 73 Pcnt | 0 C |
1719650542 | 12.3 Volt | 1060 Pkt | 220 Pkt | 74 Pcnt | 0 C |
1719650243 | 12.3 Volt | 1030 Pkt | 210 Pkt | 74 Pcnt | 0 C |
1719650242 | 12.3 Volt | 1030 Pkt | 210 Pkt | 74 Pcnt | 0 C |
1719649942 | 12.23 Volt | 1010 Pkt | 210 Pkt | 75 Pcnt | 0 C |
1719649643 | 12.3 Volt | 980 Pkt | 210 Pkt | 75 Pcnt | 0 C |
1719649642 | 12.3 Volt | 980 Pkt | 210 Pkt | 75 Pcnt | 0 C |
1719649342 | 12.3 Volt | 990 Pkt | 210 Pkt | 76 Pcnt | 0 C |
*Used Equation Coefficients:
Vin: 0, 0.075, 0
Rx1h: 0, 10, 0
Dg1h: 0, 10, 0
Eff1h: 0, 1, 0
Temp: 0, 0.5, -64
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)