This is the latest recevied telemetry packets stored in our database for station/object S55YLI-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Vin* | Rx1h* | Dg1h* | Eff1h* | Temp* |
---|---|---|---|---|---|
1719657443 | 12.3 Volt | 1140 Pkt | 270 Pkt | 76 Pcnt | 0 C |
1719657442 | 12.3 Volt | 1140 Pkt | 270 Pkt | 76 Pcnt | 0 C |
1719657142 | 12.3 Volt | 1160 Pkt | 270 Pkt | 75 Pcnt | 0 C |
1719656843 | 12.3 Volt | 1130 Pkt | 270 Pkt | 76 Pcnt | 0 C |
1719656842 | 12.3 Volt | 1130 Pkt | 270 Pkt | 76 Pcnt | 0 C |
1719656542 | 12.3 Volt | 1140 Pkt | 270 Pkt | 76 Pcnt | 0 C |
1719656243 | 12.3 Volt | 1160 Pkt | 270 Pkt | 77 Pcnt | 0 C |
1719656242 | 12.3 Volt | 1160 Pkt | 270 Pkt | 77 Pcnt | 0 C |
1719655942 | 12.3 Volt | 1140 Pkt | 270 Pkt | 77 Pcnt | 0 C |
1719655644 | 12.3 Volt | 1150 Pkt | 280 Pkt | 77 Pcnt | 0 C |
1719655642 | 12.3 Volt | 1150 Pkt | 280 Pkt | 77 Pcnt | 0 C |
1719655342 | 12.3 Volt | 1170 Pkt | 280 Pkt | 78 Pcnt | 0 C |
1719655043 | 12.3 Volt | 1150 Pkt | 280 Pkt | 78 Pcnt | 0 C |
1719655042 | 12.3 Volt | 1150 Pkt | 280 Pkt | 78 Pcnt | 0 C |
1719654742 | 12.3 Volt | 1180 Pkt | 280 Pkt | 78 Pcnt | 0 C |
1719654444 | 12.3 Volt | 1170 Pkt | 270 Pkt | 77 Pcnt | 0 C |
1719654442 | 12.3 Volt | 1170 Pkt | 270 Pkt | 77 Pcnt | 0 C |
1719654142 | 12.3 Volt | 1190 Pkt | 270 Pkt | 76 Pcnt | 0 C |
1719653846 | 12.3 Volt | 1180 Pkt | 270 Pkt | 76 Pcnt | 0 C |
1719653842 | 12.3 Volt | 1180 Pkt | 270 Pkt | 76 Pcnt | 0 C |
1719653542 | 12.3 Volt | 1210 Pkt | 270 Pkt | 75 Pcnt | 0 C |
1719653243 | 12.3 Volt | 1230 Pkt | 280 Pkt | 74 Pcnt | 0 C |
1719653242 | 12.3 Volt | 1230 Pkt | 280 Pkt | 74 Pcnt | 0 C |
1719652942 | 12.3 Volt | 1230 Pkt | 270 Pkt | 74 Pcnt | 0 C |
1719652644 | 12.23 Volt | 1210 Pkt | 260 Pkt | 73 Pcnt | 0 C |
*Used Equation Coefficients:
Vin: 0, 0.075, 0
Rx1h: 0, 10, 0
Dg1h: 0, 10, 0
Eff1h: 0, 1, 0
Temp: 0, 0.5, -64
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)