This is the latest recevied telemetry packets stored in our database for station/object S55YLI-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Vin* | Rx1h* | Dg1h* | Eff1h* | Temp* |
---|---|---|---|---|---|
1719661342 | 12.3 Volt | 1170 Pkt | 260 Pkt | 79 Pcnt | 0 C |
1719661043 | 12.3 Volt | 1170 Pkt | 260 Pkt | 80 Pcnt | 0 C |
1719661042 | 12.3 Volt | 1170 Pkt | 260 Pkt | 80 Pcnt | 0 C |
1719660742 | 12.3 Volt | 1150 Pkt | 260 Pkt | 80 Pcnt | 0 C |
1719660446 | 12.3 Volt | 1150 Pkt | 260 Pkt | 80 Pcnt | 0 C |
1719660442 | 12.3 Volt | 1150 Pkt | 260 Pkt | 80 Pcnt | 0 C |
1719660142 | 12.3 Volt | 1150 Pkt | 260 Pkt | 80 Pcnt | 0 C |
1719659843 | 12.3 Volt | 1130 Pkt | 260 Pkt | 79 Pcnt | 0 C |
1719659842 | 12.3 Volt | 1130 Pkt | 260 Pkt | 79 Pcnt | 0 C |
1719659542 | 12.3 Volt | 1110 Pkt | 250 Pkt | 78 Pcnt | 0 C |
1719659252 | 12.3 Volt | 1110 Pkt | 260 Pkt | 78 Pcnt | 0 C |
1719659242 | 12.3 Volt | 1110 Pkt | 260 Pkt | 78 Pcnt | 0 C |
1719658942 | 12.3 Volt | 1100 Pkt | 250 Pkt | 77 Pcnt | 0 C |
1719658643 | 12.3 Volt | 1120 Pkt | 260 Pkt | 77 Pcnt | 0 C |
1719658642 | 12.3 Volt | 1120 Pkt | 260 Pkt | 77 Pcnt | 0 C |
1719658342 | 12.3 Volt | 1120 Pkt | 260 Pkt | 77 Pcnt | 0 C |
1719658043 | 12.3 Volt | 1110 Pkt | 260 Pkt | 76 Pcnt | 0 C |
1719658042 | 12.3 Volt | 1110 Pkt | 260 Pkt | 76 Pcnt | 0 C |
1719657742 | 12.3 Volt | 1100 Pkt | 260 Pkt | 76 Pcnt | 0 C |
1719657443 | 12.3 Volt | 1140 Pkt | 270 Pkt | 76 Pcnt | 0 C |
1719657442 | 12.3 Volt | 1140 Pkt | 270 Pkt | 76 Pcnt | 0 C |
1719657142 | 12.3 Volt | 1160 Pkt | 270 Pkt | 75 Pcnt | 0 C |
1719656843 | 12.3 Volt | 1130 Pkt | 270 Pkt | 76 Pcnt | 0 C |
1719656842 | 12.3 Volt | 1130 Pkt | 270 Pkt | 76 Pcnt | 0 C |
1719656542 | 12.3 Volt | 1140 Pkt | 270 Pkt | 76 Pcnt | 0 C |
*Used Equation Coefficients:
Vin: 0, 0.075, 0
Rx1h: 0, 10, 0
Dg1h: 0, 10, 0
Eff1h: 0, 1, 0
Temp: 0, 0.5, -64
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)