This is the latest recevied telemetry packets stored in our database for station/object DF0OH-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Batt12V* | Batt48V* | I48V* | Umin* | Cell#* |
---|---|---|---|---|---|
1719819078 | 14.06 V | 48.2 V | -99.9 A | 2.03 V | 17 # |
1719818113 | 13.9 V | 47.86 V | -99.9 A | 2.03 V | 17 # |
1719817176 | - | - | - | - | - |
1719817176 | - | - | - | - | - |
1719817157 | 13.74 V | 47.64 V | -99.9 A | 2.03 V | 17 # |
1719816154 | - | - | - | - | - |
1719816124 | 13.66 V | 47.46 V | -99.9 A | 2.03 V | 17 # |
1719815181 | 13.65 V | 47.42 V | -99.9 A | 2.03 V | 17 # |
1719814225 | 13.67 V | 47.56 V | -99.9 A | 2.03 V | 17 # |
1719813259 | - | - | - | - | - |
1719813259 | - | - | - | - | - |
1719813250 | 13.49 V | 47.38 V | -99.9 A | 2.03 V | 17 # |
1719812317 | 13.37 V | 47.26 V | -99.9 A | 2.03 V | 17 # |
1719811373 | 13.32 V | 47.23 V | -99.9 A | 2.03 V | 17 # |
1719810441 | 13.31 V | 47.25 V | -99.9 A | 2.03 V | 17 # |
1719809498 | 13.28 V | 47.29 V | -99.9 A | 2.03 V | 17 # |
1719808586 | 13.2 V | 47.25 V | -99.9 A | 2.03 V | 17 # |
1719807610 | 13.13 V | 47.21 V | -99.9 A | 2.03 V | 17 # |
1719806653 | 13.1 V | 47.19 V | -99.9 A | 2.03 V | 17 # |
1719805732 | 13.1 V | 47.19 V | -99.9 A | 2.03 V | 17 # |
1719804799 | 13.11 V | 47.2 V | -99.9 A | 2.03 V | 17 # |
1719803823 | 13.11 V | 47.22 V | -99.9 A | 2.03 V | 17 # |
1719802868 | 13.11 V | 47.24 V | -99.9 A | 2.03 V | 17 # |
1719801925 | 13.12 V | 47.24 V | -99.9 A | 2.03 V | 17 # |
1719801013 | 13.12 V | 47.24 V | -99.9 A | 2.03 V | 17 # |
*Used Equation Coefficients:
Batt12V: 0, 0.01, 0
Batt48V: 0, 0.01, 0
I48V: 0, 0.01, -100
Umin: 0, 0.01, 0
Cell#: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)