This is the latest recevied telemetry packets stored in our database for station/object DF0OH-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Batt12V* | Batt48V* | I48V* | Umin* | Cell#* |
---|---|---|---|---|---|
1719843608 | 14.96 V | 52.22 V | -99.9 A | 2.03 V | 17 # |
1719842696 | 14.52 V | 50.13 V | -99.9 A | 2.03 V | 17 # |
1719841742 | 13.92 V | 49.57 V | -99.9 A | 2.03 V | 17 # |
1719840799 | 14.28 V | 50.19 V | -99.9 A | 2.03 V | 17 # |
1719839788 | 14.59 V | 50.49 V | -99.9 A | 2.03 V | 17 # |
1719838843 | 14.55 V | 50.43 V | -99.9 A | 2.03 V | 17 # |
1719837922 | 14.97 V | 50.93 V | -99.9 A | 2.03 V | 17 # |
1719836946 | 14.48 V | 50.06 V | -99.9 A | 2.03 V | 17 # |
1719836014 | 14.26 V | 49.09 V | -99.9 A | 2.03 V | 17 # |
1719835081 | 13.68 V | 48.96 V | -99.9 A | 2.03 V | 17 # |
1719834137 | 13.72 V | 49.22 V | -99.9 A | 2.03 V | 17 # |
1719833205 | 14.36 V | 50.19 V | -99.9 A | 2.03 V | 17 # |
1719832262 | 14.58 V | 50.19 V | -99.9 A | 2.03 V | 17 # |
1719831350 | 14.3 V | 49.75 V | -99.9 A | 2.03 V | 17 # |
1719830374 | 14.27 V | 49.7 V | -99.9 A | 2.03 V | 17 # |
1719829442 | 14.02 V | 49.48 V | -99.9 A | 2.03 V | 17 # |
1719828497 | 14.19 V | 49.82 V | -99.9 A | 2.03 V | 17 # |
1719827564 | 14.21 V | 49.87 V | -99.9 A | 2.03 V | 17 # |
1719826642 | 14.42 V | 49.97 V | -99.9 A | 2.03 V | 17 # |
1719825641 | 14.43 V | 49.74 V | -99.9 A | 2.03 V | 17 # |
1719824720 | 14.26 V | 49.36 V | -99.9 A | 2.03 V | 17 # |
1719823785 | 14.11 V | 48.9 V | -99.9 A | 2.03 V | 17 # |
1719822829 | - | - | - | - | - |
1719822819 | 14.15 V | 48.96 V | -99.9 A | 2.03 V | 17 # |
1719821887 | 14.09 V | 48.71 V | -99.9 A | 2.03 V | 17 # |
*Used Equation Coefficients:
Batt12V: 0, 0.01, 0
Batt48V: 0, 0.01, 0
I48V: 0, 0.01, -100
Umin: 0, 0.01, 0
Cell#: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)