This is the latest recevied telemetry packets stored in our database for station/object W0CHP-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | CPU Load* | CPU Temp* | Free Mem* | RX Packets* | TX Packets* |
---|---|---|---|---|---|
1719640260 | 75 % | 129.33 DegF | 522 MB | 105060 Pkts | 120390 Pkts |
1719639420 | 26.3 % | 121.58 DegF | 525 MB | 106490 Pkts | 125150 Pkts |
1719638625 | 50 % | 129.33 DegF | 526 MB | 107420 Pkts | 123410 Pkts |
1719637835 | 26.3 % | 121.58 DegF | 556 MB | 106670 Pkts | 124720 Pkts |
1719637025 | 75 % | 128.36 DegF | 563 MB | 104970 Pkts | 120550 Pkts |
1719635422 | 47.6 % | 122.55 DegF | 557 MB | 106520 Pkts | 125110 Pkts |
1719634646 | 52.6 % | 128.36 DegF | 560 MB | 105350 Pkts | 120400 Pkts |
1719633855 | 26.3 % | 121.58 DegF | 561 MB | 105890 Pkts | 124360 Pkts |
1719633075 | 71.4 % | 127.39 DegF | 528 MB | 104970 Pkts | 120380 Pkts |
1719632215 | 26.3 % | 123.52 DegF | 521 MB | 106150 Pkts | 124780 Pkts |
1719631365 | 50 % | 129.33 DegF | 525 MB | 104460 Pkts | 120400 Pkts |
1719630505 | 47.6 % | 124.49 DegF | 523 MB | 105720 Pkts | 125000 Pkts |
1719629725 | 52.2 % | 128.36 DegF | 524 MB | 105070 Pkts | 120530 Pkts |
1719628930 | 26.3 % | 124.49 DegF | 532 MB | 105500 Pkts | 125050 Pkts |
1719628125 | 70.8 % | 130.3 DegF | 534 MB | 105370 Pkts | 120360 Pkts |
1719626460 | 22.2 % | 123.52 DegF | 535 MB | 107080 Pkts | 125140 Pkts |
1719625625 | 52.6 % | 129.33 DegF | 533 MB | 106990 Pkts | 121010 Pkts |
1719624835 | 21.1 % | 123.52 DegF | 533 MB | 107390 Pkts | 124990 Pkts |
*Used Equation Coefficients:
CPU Load: 0, 1, 0
CPU Temp: 0, 1, 0
Free Mem: 0, 1, 0
RX Packets: 0, 1, 0
TX Packets: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)