This is the latest recevied telemetry packets stored in our database for station/object IR2T. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Rx10m* | Rx1h* | Dg10m* | Dg1h* | Eff1h* |
---|---|---|---|---|---|
1719845227 | 12 Pkt | 120 Pkt | 9 Pkt | 50 Pkt | 83 Pcnt |
1719844926 | 10 Pkt | 130 Pkt | 6 Pkt | 50 Pkt | 83 Pcnt |
1719844626 | 10 Pkt | 120 Pkt | 8 Pkt | 50 Pkt | 82 Pcnt |
1719844326 | 13 Pkt | 130 Pkt | 9 Pkt | 60 Pkt | 83 Pcnt |
1719844026 | 12 Pkt | 130 Pkt | 8 Pkt | 60 Pkt | 82 Pcnt |
1719843725 | 9 Pkt | 120 Pkt | 7 Pkt | 50 Pkt | 85 Pcnt |
1719843425 | 8 Pkt | 120 Pkt | 4 Pkt | 50 Pkt | 85 Pcnt |
1719843125 | 25 Pkt | 120 Pkt | 6 Pkt | 50 Pkt | 87 Pcnt |
1719842825 | 40 Pkt | 120 Pkt | 11 Pkt | 50 Pkt | 89 Pcnt |
1719842524 | 42 Pkt | 100 Pkt | 15 Pkt | 50 Pkt | 88 Pcnt |
1719842224 | 45 Pkt | 90 Pkt | 17 Pkt | 50 Pkt | 91 Pcnt |
1719841924 | 32 Pkt | 70 Pkt | 16 Pkt | 40 Pkt | 96 Pcnt |
1719841623 | 12 Pkt | 50 Pkt | 10 Pkt | 40 Pkt | 94 Pcnt |
1719841323 | 11 Pkt | 40 Pkt | 8 Pkt | 40 Pkt | 94 Pcnt |
1719841023 | 11 Pkt | 40 Pkt | 10 Pkt | 40 Pkt | 96 Pcnt |
1719840722 | 8 Pkt | 40 Pkt | 7 Pkt | 30 Pkt | 95 Pcnt |
1719840422 | 6 Pkt | 50 Pkt | 5 Pkt | 30 Pkt | 94 Pcnt |
1719840122 | 4 Pkt | 60 Pkt | 4 Pkt | 40 Pkt | 91 Pcnt |
1719839822 | 7 Pkt | 70 Pkt | 5 Pkt | 30 Pkt | 90 Pcnt |
1719839521 | 8 Pkt | 70 Pkt | 5 Pkt | 30 Pkt | 88 Pcnt |
1719839221 | 9 Pkt | 70 Pkt | 8 Pkt | 30 Pkt | 88 Pcnt |
1719838921 | 10 Pkt | 80 Pkt | 9 Pkt | 30 Pkt | 85 Pcnt |
1719838620 | 7 Pkt | 80 Pkt | 6 Pkt | 30 Pkt | 85 Pcnt |
1719838320 | 7 Pkt | 70 Pkt | 7 Pkt | 30 Pkt | 84 Pcnt |
1719838020 | 9 Pkt | 70 Pkt | 6 Pkt | 30 Pkt | 84 Pcnt |
*Used Equation Coefficients:
Rx10m: 0, 1, 0
Rx1h: 0, 10, 0
Dg10m: 0, 1, 0
Dg1h: 0, 10, 0
Eff1h: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)