This is the latest recevied telemetry packets stored in our database for station/object E24CR-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | PM1.0* | PM2.5* | PM10* | RSSI* | SUN* |
---|---|---|---|---|---|
1719645690 | 2 ug/m3 | 3 ug/m3 | 3 ug/m3 | -32 dBm | 93 % |
1719645064 | 1 ug/m3 | 2 ug/m3 | 2 ug/m3 | -32 dBm | 93 % |
1719644438 | 1 ug/m3 | 2 ug/m3 | 2 ug/m3 | -32 dBm | 93 % |
1719643814 | 1 ug/m3 | 2 ug/m3 | 2 ug/m3 | -32 dBm | 94 % |
1719643188 | 2 ug/m3 | 2 ug/m3 | 2 ug/m3 | -32 dBm | 94 % |
1719642563 | 2 ug/m3 | 2 ug/m3 | 2 ug/m3 | -32 dBm | 91 % |
1719641937 | 3 ug/m3 | 5 ug/m3 | 5 ug/m3 | -32 dBm | 91 % |
1719641312 | 2 ug/m3 | 3 ug/m3 | 3 ug/m3 | -32 dBm | 92 % |
1719640686 | 3 ug/m3 | 4 ug/m3 | 4 ug/m3 | -32 dBm | 94 % |
1719640062 | 3 ug/m3 | 4 ug/m3 | 4 ug/m3 | -32 dBm | 94 % |
1719639437 | 2 ug/m3 | 2 ug/m3 | 2 ug/m3 | -32 dBm | 94 % |
1719638810 | 2 ug/m3 | 4 ug/m3 | 4 ug/m3 | -32 dBm | 94 % |
1719638182 | 2 ug/m3 | 4 ug/m3 | 4 ug/m3 | -32 dBm | 94 % |
1719637557 | 2 ug/m3 | 3 ug/m3 | 3 ug/m3 | -33 dBm | 94 % |
1719636929 | 3 ug/m3 | 3 ug/m3 | 3 ug/m3 | -32 dBm | 91 % |
1719636304 | 3 ug/m3 | 4 ug/m3 | 4 ug/m3 | -32 dBm | 95 % |
1719635678 | 2 ug/m3 | 3 ug/m3 | 3 ug/m3 | -32 dBm | 95 % |
1719635053 | 2 ug/m3 | 3 ug/m3 | 3 ug/m3 | -32 dBm | 95 % |
*Used Equation Coefficients:
PM1.0: 0, 1, 0
PM2.5: 0, 1, 0
PM10: 0, 1, 0
RSSI: 0, -1, 0
SUN: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)