This is the latest recevied telemetry packets stored in our database for station/object S55YCR-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Vin* | Rx1h* | Dg1h* | Eff1h* | A5* |
---|---|---|---|---|---|
1719654229 | 12.23 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
1719653929 | 12.23 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
1719653629 | 12.23 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
1719653329 | 12.23 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
1719653029 | 12.23 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
1719652729 | 12.23 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
1719652429 | 12.23 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
1719652129 | 12.23 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
1719651829 | 12.23 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
1719651529 | 12.23 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
1719651229 | 12.23 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
1719650929 | 12.23 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
1719650629 | 12.23 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
1719650329 | 12.23 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
1719650029 | 12.23 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
1719649729 | 12.23 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
1719649429 | 12.23 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
1719649129 | 12.23 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
1719648829 | 12.23 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
1719648529 | 12.23 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
1719648229 | 12.23 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
1719647929 | 12.23 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
1719647629 | 12.23 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
1719647329 | 12.23 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
1719647029 | 12.23 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
*Used Equation Coefficients:
Vin: 0, 0.075, 0
Rx1h: 0, 10, 0
Dg1h: 0, 10, 0
Eff1h: 0, 1, 0
A5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)