This is the latest recevied telemetry packets stored in our database for station/object N7RIG-5. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Avg 10m* | Avg 10m* | RxPkts* | IGateDropRx* | TxPkts* |
---|---|---|---|---|---|
1719814286 | 0 Rx Erlang | 0.36 Tx Erlang | 2 count/10m | 0 count/10m | 234 count/10m |
1719813086 | 0 Rx Erlang | 0.36 Tx Erlang | 2 count/10m | 0 count/10m | 239 count/10m |
1719811886 | 0.01 Rx Erlang | 0.41 Tx Erlang | 4 count/10m | 0 count/10m | 271 count/10m |
1719810686 | 0 Rx Erlang | 0.37 Tx Erlang | 2 count/10m | 0 count/10m | 247 count/10m |
1719809486 | 0 Rx Erlang | 0.39 Tx Erlang | 2 count/10m | 0 count/10m | 246 count/10m |
1719808286 | 0.01 Rx Erlang | 0.38 Tx Erlang | 4 count/10m | 0 count/10m | 258 count/10m |
1719807086 | 0.01 Rx Erlang | 0.36 Tx Erlang | 8 count/10m | 0 count/10m | 249 count/10m |
1719805886 | 0 Rx Erlang | 0.37 Tx Erlang | 4 count/10m | 0 count/10m | 241 count/10m |
1719804686 | 0 Rx Erlang | 0.4 Tx Erlang | 2 count/10m | 0 count/10m | 268 count/10m |
1719803486 | 0.01 Rx Erlang | 0.36 Tx Erlang | 6 count/10m | 0 count/10m | 250 count/10m |
1719802286 | 0 Rx Erlang | 0.36 Tx Erlang | 4 count/10m | 0 count/10m | 243 count/10m |
1719801086 | 0 Rx Erlang | 0.39 Tx Erlang | 3 count/10m | 0 count/10m | 267 count/10m |
1719799886 | 0 Rx Erlang | 0.39 Tx Erlang | 2 count/10m | 1 count/10m | 272 count/10m |
1719798686 | 0 Rx Erlang | 0.43 Tx Erlang | 3 count/10m | 0 count/10m | 298 count/10m |
1719797486 | 0 Rx Erlang | 0.44 Tx Erlang | 1 count/10m | 0 count/10m | 291 count/10m |
*Used Equation Coefficients:
Avg 10m: 0, 0.005, 0
Avg 10m: 0, 0.005, 0
RxPkts: 0, 1, 0
IGateDropRx: 0, 1, 0
TxPkts: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)