This is the latest recevied telemetry packets stored in our database for station/object TA7FTH-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | RxTraffic* | TxTraffic* | RxDrop* | RSSI* | Voltage* |
---|---|---|---|---|---|
1717243618 | 0 Pkt | 49 Pkt | 0 Pkt | -62 dBm | 3.83 V |
1717242692 | 0 Pkt | 46 Pkt | 0 Pkt | -63 dBm | 3.86 V |
1717241767 | 0 Pkt | 48 Pkt | 0 Pkt | -65 dBm | 3.9 V |
1717240841 | 0 Pkt | 51 Pkt | 0 Pkt | -62 dBm | 3.83 V |
1717239915 | 0 Pkt | 60 Pkt | 0 Pkt | -63 dBm | 3.83 V |
1717238988 | 0 Pkt | 57 Pkt | 0 Pkt | -63 dBm | 3.86 V |
1717238061 | 0 Pkt | 49 Pkt | 0 Pkt | -63 dBm | 3.86 V |
1717237135 | 0 Pkt | 56 Pkt | 0 Pkt | -63 dBm | 3.86 V |
1717236208 | 0 Pkt | 50 Pkt | 0 Pkt | -63 dBm | 3.86 V |
1717235282 | 0 Pkt | 10 Pkt | 0 Pkt | -61 dBm | 3.86 V |
1717235072 | 0 Pkt | 54 Pkt | 0 Pkt | -55 dBm | 3.86 V |
1717234146 | 0 Pkt | 42 Pkt | 0 Pkt | -56 dBm | 3.86 V |
1717233222 | 0 Pkt | 47 Pkt | 0 Pkt | -54 dBm | 3.86 V |
1717232295 | 0 Pkt | 42 Pkt | 0 Pkt | -53 dBm | 3.86 V |
1717231371 | 0 Pkt | 41 Pkt | 0 Pkt | -54 dBm | 3.86 V |
1717230445 | 0 Pkt | 61 Pkt | 0 Pkt | -56 dBm | 3.88 V |
1717229518 | 0 Pkt | 61 Pkt | 0 Pkt | -56 dBm | 3.86 V |
1717228591 | 0 Pkt | 77 Pkt | 0 Pkt | -56 dBm | 3.86 V |
1717227663 | 0 Pkt | 79 Pkt | 0 Pkt | -53 dBm | 3.86 V |
1717226735 | 0 Pkt | 87 Pkt | 0 Pkt | -53 dBm | 3.86 V |
1717225806 | 0 Pkt | 83 Pkt | 0 Pkt | -57 dBm | 3.86 V |
1717224879 | 0 Pkt | 86 Pkt | 0 Pkt | -52 dBm | 3.88 V |
1717223951 | 0 Pkt | 69 Pkt | 0 Pkt | -53 dBm | 3.86 V |
1717223022 | 0 Pkt | 52 Pkt | 0 Pkt | -55 dBm | 3.83 V |
1717222096 | 0 Pkt | 65 Pkt | 0 Pkt | -57 dBm | 3.86 V |
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
RSSI: 0, -1, 0
Voltage: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)