This is the latest recevied telemetry packets stored in our database for station/object YO3JAZ-NK. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Value1* | Value2* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1718383982 | 124 | 0 | 15 | 42 | 16 |
1718383622 | 124 | 0 | 15 | 42 | 16 |
1718383262 | 124 | 0 | 16 | 41 | 14 |
1718382902 | 123 | 0 | 16 | 42 | 14 |
1718382542 | 123 | 0 | 17 | 40 | 14 |
1718382182 | 123 | 0 | 18 | 39 | 16 |
1718381822 | 123 | 0 | 19 | 40 | 16 |
1718381462 | 123 | 0 | 19 | 39 | 15 |
1718381102 | 123 | 0 | 21 | 40 | 14 |
1718380742 | 123 | 0 | 30 | 40 | 14 |
1718380382 | 124 | 0 | 19 | 39 | 16 |
1718380022 | 124 | 0 | 15 | 39 | 18 |
1718379662 | 124 | 0 | 21 | 39 | 16 |
1718379302 | 125 | 0 | 21 | 39 | 14 |
1718378942 | 126 | 0 | 21 | 39 | 14 |
1718378582 | 126 | 0 | 17 | 38 | 15 |
1718378222 | 127 | 0 | 24 | 39 | 16 |
1718377862 | 126 | 0 | 34 | 39 | 16 |
1718377502 | 126 | 0 | 35 | 38 | 15 |
1718377142 | 124 | 0 | 29 | 37 | 14 |
1718376782 | 124 | 0 | 35 | 40 | 15 |
1718376422 | 122 | 0 | 43 | 41 | 15 |
1718376062 | 122 | 0 | 46 | 40 | 16 |
1718375702 | 122 | 0 | 35 | 40 | 14 |
1718375342 | 122 | 0 | 33 | 40 | 14 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)