This is the latest recevied telemetry packets stored in our database for station/object IU4DKT-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Value1* | Value2* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1718443354 | 71 | 47 | 0 | 582 | 55 |
1718443054 | 65 | 48 | 0 | 583 | 56 |
1718442754 | 77 | 49 | 0 | 584 | 56 |
1718442454 | 70 | 49 | 0 | 585 | 55 |
1718442154 | 60 | 50 | 0 | 586 | 53 |
1718441854 | 61 | 52 | 0 | 587 | 54 |
1718441554 | 69 | 52 | 0 | 588 | 54 |
1718441254 | 75 | 52 | 0 | 589 | 54 |
1718440954 | 71 | 52 | 0 | 590 | 53 |
1718440654 | 93 | 52 | 1 | 591 | 55 |
1718440354 | 86 | 51 | 9 | 592 | 54 |
1718440054 | 81 | 47 | 10 | 591 | 52 |
1718439754 | 78 | 45 | 7 | 571 | 51 |
1718439454 | 78 | 43 | 5 | 562 | 50 |
1718439154 | 81 | 42 | 4 | 555 | 50 |
1718438854 | 94 | 42 | 2 | 549 | 51 |
1718438554 | 84 | 39 | 2 | 547 | 50 |
1718438254 | 66 | 36 | 1 | 546 | 48 |
1718437954 | 71 | 34 | 0 | 544 | 46 |
1718437654 | 73 | 34 | 0 | 545 | 46 |
1718437354 | 59 | 33 | 0 | 546 | 44 |
1718437054 | 43 | 34 | 0 | 547 | 44 |
1718436754 | 30 | 34 | 0 | 548 | 44 |
1718436454 | 42 | 35 | 0 | 549 | 44 |
1718436154 | 61 | 41 | 0 | 550 | 48 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)