This is the latest recevied telemetry packets stored in our database for station/object HR1AHR-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Value1* | Value2* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1718372005 | 181 | 12 | 2 | 94 | 0 |
1718371043 | 181 | 13 | 2 | 93 | 0 |
1718368406 | 181 | 15 | 2 | 91 | 0 |
1718367383 | 181 | 13 | 1 | 86 | 0 |
1718364806 | 181 | 13 | 2 | 93 | 0 |
1718363723 | 181 | 13 | 2 | 95 | 0 |
1718361206 | 181 | 14 | 2 | 92 | 0 |
1718360063 | 181 | 14 | 2 | 91 | 0 |
1718357606 | 181 | 11 | 2 | 92 | 0 |
1718356403 | 181 | 13 | 2 | 94 | 0 |
1718354006 | 181 | 12 | 2 | 96 | 0 |
1718352743 | 181 | 12 | 2 | 97 | 0 |
1718350408 | 181 | 12 | 2 | 88 | 0 |
1718349083 | 181 | 13 | 2 | 85 | 0 |
1718346806 | 181 | 10 | 2 | 85 | 0 |
1718345424 | 181 | 12 | 2 | 87 | 0 |
1718343206 | 181 | 12 | 2 | 90 | 0 |
1718341764 | 181 | 13 | 2 | 92 | 0 |
1718339606 | 181 | 12 | 2 | 96 | 0 |
1718338104 | 181 | 13 | 2 | 97 | 0 |
1718336006 | 181 | 11 | 2 | 83 | 0 |
1718334444 | 181 | 11 | 2 | 82 | 0 |
1718332406 | 181 | 14 | 2 | 89 | 0 |
1718330784 | 181 | 13 | 2 | 89 | 0 |
1718328809 | 181 | 10 | 2 | 91 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)