This is the latest recevied telemetry packets stored in our database for station/object WC4PEM-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Temp* | Vin* | Dg1h* | Rx1h* | Eff1h* |
---|---|---|---|---|---|
1718370388 | 26 C | 14.18 Volt | 370 Pkt | 131 Pkt | 68 Pcnt |
1718370387 | 26 C | 14.18 Volt | 370 Pkt | 131 Pkt | 68 Pcnt |
1718370087 | 24.5 C | 14.18 Volt | 360 Pkt | 130 Pkt | 68 Pcnt |
1718369787 | 25 C | 14.1 Volt | 360 Pkt | 129 Pkt | 67 Pcnt |
1718369787 | 25 C | 14.1 Volt | 360 Pkt | 129 Pkt | 67 Pcnt |
1718369487 | 26 C | 14.18 Volt | 350 Pkt | 127 Pkt | 67 Pcnt |
1718369188 | 24 C | 14.18 Volt | 360 Pkt | 127 Pkt | 66 Pcnt |
1718369187 | 24 C | 14.18 Volt | 360 Pkt | 127 Pkt | 66 Pcnt |
1718368887 | 26 C | 14.03 Volt | 350 Pkt | 123 Pkt | 65 Pcnt |
1718368587 | 24 C | 14.18 Volt | 350 Pkt | 123 Pkt | 64 Pcnt |
1718368587 | 24 C | 14.18 Volt | 350 Pkt | 123 Pkt | 64 Pcnt |
1718368287 | 26.5 C | 14.18 Volt | 350 Pkt | 123 Pkt | 64 Pcnt |
1718367988 | 24 C | 14.18 Volt | 350 Pkt | 123 Pkt | 64 Pcnt |
1718367987 | 24 C | 14.18 Volt | 350 Pkt | 123 Pkt | 64 Pcnt |
1718367687 | 26 C | 14.1 Volt | 350 Pkt | 123 Pkt | 64 Pcnt |
1718367388 | 24.5 C | 14.18 Volt | 350 Pkt | 123 Pkt | 65 Pcnt |
1718367387 | 24.5 C | 14.18 Volt | 350 Pkt | 123 Pkt | 65 Pcnt |
1718367087 | 26 C | 14.18 Volt | 350 Pkt | 124 Pkt | 65 Pcnt |
1718366787 | 25 C | 14.18 Volt | 360 Pkt | 126 Pkt | 66 Pcnt |
1718366787 | 25 C | 14.18 Volt | 360 Pkt | 126 Pkt | 66 Pcnt |
1718366487 | 25.5 C | 14.18 Volt | 350 Pkt | 127 Pkt | 68 Pcnt |
1718366187 | 26.5 C | 14.18 Volt | 360 Pkt | 130 Pkt | 68 Pcnt |
1718366187 | 26.5 C | 14.18 Volt | 360 Pkt | 130 Pkt | 68 Pcnt |
1718365887 | 24.5 C | 14.18 Volt | 350 Pkt | 128 Pkt | 69 Pcnt |
1718365587 | 26 C | 14.18 Volt | 350 Pkt | 127 Pkt | 69 Pcnt |
*Used Equation Coefficients:
Temp: 0, 0.5, -64
Vin: 0, 0.075, 0
Dg1h: 0, 10, 0
Rx1h: 0, 1, 0
Eff1h: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)