This is the latest recevied telemetry packets stored in our database for station/object DJ8RZ. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Avg 10m* | Avg 10m* | RxPkts* | IGateDropRx* | TxPkts* |
---|---|---|---|---|---|
1717246404 | 0 Rx Erlang | 0 Tx Erlang | 0 count/10m | 0 count/10m | 0 count/10m |
1717245204 | 0 Rx Erlang | 0 Tx Erlang | 0 count/10m | 0 count/10m | 0 count/10m |
1717244004 | 0 Rx Erlang | 0 Tx Erlang | 0 count/10m | 0 count/10m | 0 count/10m |
1717242804 | 0 Rx Erlang | 0 Tx Erlang | 0 count/10m | 0 count/10m | 0 count/10m |
1717241604 | 0 Rx Erlang | 0 Tx Erlang | 0 count/10m | 0 count/10m | 0 count/10m |
1717240404 | 0 Rx Erlang | 0 Tx Erlang | 0 count/10m | 0 count/10m | 0 count/10m |
1717239204 | 0 Rx Erlang | 0 Tx Erlang | 0 count/10m | 0 count/10m | 0 count/10m |
1717238004 | 0 Rx Erlang | 0 Tx Erlang | 0 count/10m | 0 count/10m | 0 count/10m |
1717236804 | 0 Rx Erlang | 0 Tx Erlang | 0 count/10m | 0 count/10m | 0 count/10m |
1717235604 | 0 Rx Erlang | 0 Tx Erlang | 0 count/10m | 0 count/10m | 0 count/10m |
1717234404 | 0 Rx Erlang | 0 Tx Erlang | 0 count/10m | 0 count/10m | 0 count/10m |
1717233204 | 0 Rx Erlang | 0 Tx Erlang | 0 count/10m | 0 count/10m | 0 count/10m |
1717232004 | 0 Rx Erlang | 0 Tx Erlang | 0 count/10m | 0 count/10m | 0 count/10m |
1717230803 | 0 Rx Erlang | 0 Tx Erlang | 0 count/10m | 0 count/10m | 0 count/10m |
1717229604 | 0 Rx Erlang | 0 Tx Erlang | 0 count/10m | 0 count/10m | 0 count/10m |
1717228404 | 0 Rx Erlang | 0 Tx Erlang | 0 count/10m | 0 count/10m | 0 count/10m |
1717227204 | 0 Rx Erlang | 0 Tx Erlang | 0 count/10m | 0 count/10m | 0 count/10m |
1717226004 | 0 Rx Erlang | 0 Tx Erlang | 0 count/10m | 0 count/10m | 0 count/10m |
1717224804 | 0 Rx Erlang | 0 Tx Erlang | 0 count/10m | 0 count/10m | 0 count/10m |
1717223604 | 0 Rx Erlang | 0 Tx Erlang | 0 count/10m | 0 count/10m | 0 count/10m |
1717222404 | 0 Rx Erlang | 0 Tx Erlang | 0 count/10m | 0 count/10m | 0 count/10m |
1717221204 | 0 Rx Erlang | 0 Tx Erlang | 0 count/10m | 0 count/10m | 0 count/10m |
1717220004 | 0 Rx Erlang | 0 Tx Erlang | 0 count/10m | 0 count/10m | 0 count/10m |
1717218804 | 0 Rx Erlang | 0 Tx Erlang | 0 count/10m | 0 count/10m | 0 count/10m |
1717217604 | 0 Rx Erlang | 0 Tx Erlang | 0 count/10m | 0 count/10m | 0 count/10m |
*Used Equation Coefficients:
Avg 10m: 0, 0.005, 0
Avg 10m: 0, 0.005, 0
RxPkts: 0, 1, 0
IGateDropRx: 0, 1, 0
TxPkts: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)