This is the latest recevied telemetry packets stored in our database for station/object VA7OGO-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Value1* | Value2* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1717249863 | 122 | 24 | 70 | 66 | 49 |
1717246247 | 122 | 25 | 70 | 41 | 49 |
1717244439 | 122 | 22 | 73 | 41 | 48 |
1717242633 | 122 | 22 | 70 | 41 | 74 |
1717240827 | 122 | 23 | 74 | 66 | 49 |
1717239020 | 122 | 23 | 70 | 41 | 49 |
1717237211 | 122 | 19 | 71 | 66 | 49 |
1717235403 | 122 | 24 | 101 | 42 | 48 |
1717233598 | 123 | 23 | 70 | 41 | 49 |
1717231792 | 123 | 24 | 98 | 42 | 74 |
1717228179 | 124 | 23 | 70 | 63 | 49 |
1717224562 | 125 | 27 | 70 | 41 | 49 |
1717222754 | 125 | 22 | 70 | 41 | 48 |
1717219138 | 126 | 27 | 72 | 41 | 49 |
1717217329 | 127 | 24 | 69 | 41 | 48 |
1717215516 | 128 | 25 | 98 | 42 | 75 |
1717213708 | 129 | 27 | 69 | 41 | 48 |
1717211898 | 130 | 29 | 67 | 67 | 49 |
1717208287 | 133 | 51 | 62 | 41 | 48 |
1717206483 | 133 | 27 | 67 | 41 | 48 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)