This is the latest recevied telemetry packets stored in our database for station/object EL-W4NAS. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Value1* | Value2* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1718393837 | 0.54 RX Erlang | 0.57 TX Erlang | 20 RXcount/10m | 20 TXcount/10m | 0 none1 |
1718393237 | 0.14 RX Erlang | 0.16 TX Erlang | 10 RXcount/10m | 10 TXcount/10m | 0 none1 |
1718392637 | 0.32 RX Erlang | 0.34 TX Erlang | 15 RXcount/10m | 15 TXcount/10m | 0 none1 |
1718392037 | 0.8 RX Erlang | 0.85 TX Erlang | 25 RXcount/10m | 24 TXcount/10m | 0 none1 |
1718391437 | 0.95 RX Erlang | 0.97 TX Erlang | 16 RXcount/10m | 14 TXcount/10m | 0 none1 |
1718390837 | 0.85 RX Erlang | 0.88 TX Erlang | 21 RXcount/10m | 20 TXcount/10m | 0 none1 |
1718390237 | 0.01 RX Erlang | 0.01 TX Erlang | 2 RXcount/10m | 2 TXcount/10m | 0 none1 |
1718389637 | 0 RX Erlang | 0 TX Erlang | 0 RXcount/10m | 0 TXcount/10m | 0 none1 |
1718389037 | 0 RX Erlang | 0.03 TX Erlang | 0 RXcount/10m | 1 TXcount/10m | 0 none1 |
1718388437 | 0 RX Erlang | 0.01 TX Erlang | 1 RXcount/10m | 1 TXcount/10m | 0 none1 |
1718387837 | 0 RX Erlang | 0 TX Erlang | 0 RXcount/10m | 0 TXcount/10m | 0 none1 |
1718387237 | 0 RX Erlang | 0 TX Erlang | 0 RXcount/10m | 0 TXcount/10m | 0 none1 |
1718386637 | 0 RX Erlang | 0.01 TX Erlang | 0 RXcount/10m | 1 TXcount/10m | 0 none1 |
1718386037 | 0.47 RX Erlang | 0.51 TX Erlang | 26 RXcount/10m | 25 TXcount/10m | 0 none1 |
1718384837 | 0.78 RX Erlang | 0.83 TX Erlang | 30 RXcount/10m | 30 TXcount/10m | 0 none1 |
1718384237 | 0.84 RX Erlang | 0.87 TX Erlang | 22 RXcount/10m | 21 TXcount/10m | 0 none1 |
1718383637 | 0.87 RX Erlang | 0.91 TX Erlang | 24 RXcount/10m | 24 TXcount/10m | 0 none1 |
1718383037 | 0.7 RX Erlang | 0.75 TX Erlang | 35 RXcount/10m | 34 TXcount/10m | 0 none1 |
1718382437 | 0.26 RX Erlang | 0.29 TX Erlang | 18 RXcount/10m | 18 TXcount/10m | 0 none1 |
1718381837 | 0.13 RX Erlang | 0.14 TX Erlang | 7 RXcount/10m | 5 TXcount/10m | 0 none1 |
1718381237 | 0.63 RX Erlang | 0.68 TX Erlang | 34 RXcount/10m | 30 TXcount/10m | 0 none1 |
1718380637 | 0.29 RX Erlang | 0.32 TX Erlang | 14 RXcount/10m | 14 TXcount/10m | 0 none1 |
1718380037 | 0 RX Erlang | 0 TX Erlang | 0 RXcount/10m | 0 TXcount/10m | 0 none1 |
1718379437 | 0 RX Erlang | 0 TX Erlang | 0 RXcount/10m | 0 TXcount/10m | 0 none1 |
1718378837 | 0 RX Erlang | 0 TX Erlang | 0 RXcount/10m | 0 TXcount/10m | 0 none1 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)