This is the latest recevied telemetry packets stored in our database for station/object DB0EIR-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Temp* | Humi* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1717250902 | 22.7 deg C | 59.7 % | 0 | 0 | 0 |
1717250571 | 22.7 deg C | 58.6 % | 0 | 0 | 0 |
1717249671 | 22.7 deg C | 58 % | 0 | 0 | 0 |
1717248771 | 22.8 deg C | 56 % | 0 | 0 | 0 |
1717247871 | 22.8 deg C | 56 % | 0 | 0 | 0 |
1717246971 | 22.7 deg C | 56.2 % | 0 | 0 | 0 |
1717246071 | 22.7 deg C | 56.3 % | 0 | 0 | 0 |
1717245171 | 22.6 deg C | 56.6 % | 0 | 0 | 0 |
1717244271 | 22.5 deg C | 57.3 % | 0 | 0 | 0 |
1717243370 | 22.3 deg C | 57.3 % | 0 | 0 | 0 |
1717242470 | 22.2 deg C | 57.6 % | 0 | 0 | 0 |
1717241570 | 22.1 deg C | 58.3 % | 0 | 0 | 0 |
1717240670 | 22.1 deg C | 57.7 % | 0 | 0 | 0 |
1717239770 | 22 deg C | 57.9 % | 0 | 0 | 0 |
1717238870 | 22.1 deg C | 57.4 % | 0 | 0 | 0 |
1717238537 | 22.1 deg C | 57 % | 0 | 0 | 0 |
1717237637 | 22.2 deg C | 56.2 % | 0 | 0 | 0 |
1717236737 | 22.2 deg C | 55.6 % | 0 | 0 | 0 |
1717235837 | 22.3 deg C | 54.6 % | 0 | 0 | 0 |
1717234937 | 22.4 deg C | 53.8 % | 0 | 0 | 0 |
1717234037 | 22.7 deg C | 50.7 % | 0 | 0 | 0 |
1717233137 | 22.7 deg C | 50.5 % | 0 | 0 | 0 |
1717232237 | 22.7 deg C | 50.3 % | 0 | 0 | 0 |
1717231337 | 22.7 deg C | 50.3 % | 0 | 0 | 0 |
1717230437 | 22.7 deg C | 50.2 % | 0 | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)